Sortie 4

For scheduled squadron missions.
Post Reply
Specter13
Posts: 38
Joined: Mon Nov 05, 2018 5:53 pm

Sortie 4

Post by Specter13 » Sat Nov 24, 2018 6:18 pm

After getting briefed from Command our task is to take out a weapons factory that the Russians have built up by using innocent civilians for free labor. The Russians are using this factory to create weapons that could cripple our motives for being here. Our main goal is to take out this factory if time permits you are weapons free to take out any other remaining building in the area do not be in the AO longer than 10 minutes from the time of the first strike. The enemy will most likely send a patrol unit both on the ground and in the air.

Be sure to follow the path very carefully that is set to the group of waypoints on your HSI to remain out of the radar and launch area of the SAM sites in the AO and stay as low as possible until reaching the target. Waypoint 6 is set into your HSI at ground level so you can utilize AUTO mode if needed.

WP 0 - Mother T/O / ascend between angels 18 and 20
WP 1 - Prep to meet with Tanker
WP 2 - Utilize as regroup in case of separation after tasking
WP 3 - 20nm out hit the deck and stay as low as possible F.O.P. (Fly Over Point)
WP 4 - F.O.P. Remain low
WP 5 - F.O.P. Remain low
WP 6 - Target area/20nm out push speed up to 500kts and climb to an altitude of no more than 2000ft RADAR ALT
WP 7 - Khasab AB

Total Distance: 465nm or 570nm if returning to Mother from WP 6.
Tanker will be on station at between WP 1 and WP 2. And another will be at located at Mother. See below for COMM/TCN information.

Total Flight Time : ~60+/- 10 minutes

Weather INFO:
Skies - clear
Temp - 32C
Fog - None
Wind/Direction - @33ft 6kts for 079
Turbulence - yes

COMMS/TCN INFO:

Dealer Flight:
Comm 1 Preset 1: 305.0 AM

Mother:
Comm 2 Preset 1 - 297.0 AM
TCN - 74X
ICLS - 20

Shell:
Comm 2 Preset 3 - 315.5 AM
TCN - 17X
Alt - Angel 18/250kts

Arco:
Comm 2 Preset 5 - 322.5
TCN - 36X
Alt - Angel 18/250kts

Khasab:
Comm 2 Preset 4 - 250.0 AM
TCN - 84X

Post Reply